Vad skulle passa bättre i köket än en 3D cupcake-kudde? Skapa denna söta kudde med olika tyger, lugg och vadd.


Cupcake Cushion

Create a fun cupcake appliqué cushion with pom pom fringe. The back is finished with a fun, modern look by adding a heavy metal zipper attached with a contrasting zig zag stitch.

A cushion that is reversible for more home decor options!

To make it “You”, pick your favorite color and have fun sewing!

Finished size: 18” x 18” (45cm x 45cm)

What You Need: Prepare
  • Cut the pieces according to the template for the front piece 18”x18” (46cm x46cm), the two back pieces 18”x 10” (46cmx25cm).
  • Print the template of the cupcake and cut out the two parts.
  • Iron the double sided fusible web to the back of the cupcake bottom fabric.

Sew the Cupcake front piece

1. Place the applique piece for the bottom part of the cupcake as shown on the template. Peel off the paper and iron it in place. Sew with zig zag stitch # 5, adjust the stitch width to 2mm and the stitch length to 1.5mm. Use the needle Stop Up/Down position to turn the corners.
2. Stitch the white decoration lines with a satin stitch #27 using an embroidery thread. Adjust the stitch width to 4mm wide.
3. Fuse and sew the cupcake top in place, matching the points of the arrows as shown in the illustration above.  Attach the appliqué with zig zag # 5 or satin stitch # 27. Adjust the stitch width to your liking.
4. Use the marking pen to draw the curvy lines where you are going to stitch the yarn in place. Cut a small opening on the on the backside of the cushion front, approximately 2” (5cm) long, behind the pink appliqué and only in the white fabric. So you can add a small amount of fiber fill inside the pink part of the cupcake for added dimension.
5. Add yarn on the lines using the Narrow Braid /Cord Foot. Zig zag to match the width of your yarn.
6. Pin the fringe around the edge of the cushion front on the right side. Stitch in place with a zig zag stitch.

Sew the heavy zipper on the back piece
7. Zig zag around the pieces.
8. Press the seam allowance to the wrong side on both back pieces where you will be adding the zipper.
9. Stitch along the side of the zipper with the reinforced zig zag stitch #11. Set the stitch width to 7mm and snap on zipper foot E. Sew both sides of the zipper.

10. Pin the cushion front and cushion back together, with right sides facing. Open the zipper at least halfway so you can turn the cushion right side out.
11. Refer to the Sewing Guide inside the lid of your JADE 20 sewing machine to set your machine for a straight stitch on woven medium fabric. Use the needle Stop Up/Down position to easily turn the corners.
12. Turn the cushion right side out. Press.
13. Add a cushion form inside and you have completed your fun cupcake cushion.

Template Cupcake Top  Template Cupcake Bottom


A few other things you might enjoy:

Taggad som::
Blogginlägget har för närvarande inte några kommentarer.