Spanish Hemstitch Foot, DESIGNER SE™

Item #: 412726403

Spanish Hemstitching is a delightful addition to any project. It is used to join two finished edges. It works well to attach borders, edging to a skirt or curtain or to piece fabric, for example to achieve the width needed for a tablecloth. For the above models, the Spanish Hemstitch Distance Plate snaps on to the standard needle plate.

Other information

Stitch seams with a decorative open work.
1. Press a 3/8" (1 cm) seam allowance of the fabric edges that will be stitched together.

2. Change the regular needle plate to the Spanish Hemstitch Plate. Attach thewhite distance on the front of the needle plate. Snap on the Spanish Hemstitch Foot. Thread with a decorative thread on top and in the bobbin.

3. Line up the pressed edge of the pieces together with the distance on the plate in between.
Optional: Place a decorative thread in the groove of the distance. Lower the presser foot.

4. Select a zigzag stitch, three-step zigzag stitch or a decorative stitch. Adjust stitch width to 5.0-7.0 to make sure that the needle catches the fabric edges.
Note: Avoid using stitches with too much side motion.

5. Sew, holding the edges gently together in front of the foot.

for DESIGNER™ SE and DESIGNER™ SE Limited Edition machines.

image description

Make magic, easier.

Browse our complete accessory catalogue to find just the right prop.