HUSKYLOCK™ Cording & Piping Set

Item #: 412671101
Cording and Piping Foot to sew on cording. 
 
 

Other information

1. Press the stitch selection button until “Auto N” “Coverstitch narrow” appears.
Set machine for Coverstitch.
2. Press the fabric selection button until appropriate fabric type appears.
 
Note: Use needle B & E.
3. Raise the presser foot and snap on cording and piping foot.
4. Snap Cord Guide into hole on front of needle plate.
5. Insert cord into the hole of the cord guide, then traverse through
groove of the cording and piping foot.
Note: 1/8"-1/4" (1.5~2.0 mm) cord can be used.
6. Pull the cord tail about 2" (5 cm) behind the foot.
7. lnsert fabric between the foot and cord. Slide fabric under foot and
up to needles.
Lower presser foot and sew.
Note: Hold cord behind foot when beginning to sew.
To sew piping:
1. Press the stitch selection button until “Auto L” “Chainstitch” appears. Set machine
for Chainstitch.
2. Press the fabric selection button until appropriate fabric type appears.
Note: Although SEWING ADVISOR™ feature recommends needle A, use needle B.
3. Raise presser foot and snap on Cording and Piping foot.
Note: The cord guide is not used for this technique.
4. Insert cording through the groove on cording and piping foot.
Pull cord tail behind foot about 2" (5 cm).
Note: 1/8"–1/4" (1–2.0 mm) cord can be used.
5. Wrap fabric around cording in front of foot. Slide fabric under
front of foot.
6. Lower presser foot and sew over cord and fabric.
Note: Hold cord behind foot when beginning to sew.
 

image description

Make magic, easier.

Browse our complete accessory catalogue to find just the right prop.

Browse