Organza Ribbons with a Serger
Posted by HUSQVARNA VIKING®
There are several serger/overlock stitches that are suitable for finishing the edges on an organza ribbon. The serger/overlock machine will trim the edges and finish them in one step. Both convenient and time saving.
You need:
-
Strips of organza (or other beautiful fabric) the width and length you desire.
-
Matching or contrasting serger- or decorative thread
Sew:
Set the machine for the stitch of your choice. Recommended stitches are:
-
3-thread narrow edge
-
3-thread wrapped overlock wide or narrow
-
3-thread rolled edge
-
2-thread wrapped overlock wide or narrow
-
2-thread narrow edge
-
2-thread rolled edge