Designer I Updates since 1998

  • One touch basting around an embroidery design.
  • Customize your own stitch menu.
  • V menu stitches 13, for free-motion and baste.
  • Red frame around changed settings.
  • Automatic cursor advance when programming.
  • Overview of embroidery color blocks in help, including thread numbers.
  • Four new buttonholes in the B menu.
  • Selection of automatic or manual FIX in the SET menu.
  • Embroidery Position Reset, change position of embroidery in hoop and make note of position coordinates. Can be reset to position later.
  • The Hoop Selection pop-up menu now includes the Mega Hoop selection, and the program supports the Mega Hoop.
  • A pop-up tells you when itís time to change position on the Mega Hoop, which has also been added to the hoop selection menu.
  • Q foot on/off settings are added in the SET3 menu, and an alert message is displayed when the machine is started if the Q foot is active.
  • @ has been added to stitch alphabets and is now supported on embroidery font disks.
  • The disk icon on the main menu is rotated 90 degrees to indicate the proper disk insert direction.
  • Four new stitches added to the K menu.
  • The Users Guide is updated at every major software update. New pages are available to download from our web site.
  • New stitching order for satin buttonholes when using the Sensor Buttonhole foot. This will give a more balanced look to the columns
  • Four new stitches have been added. D46 (pin stitch), F15 ("precision appliquÈ"), F16 ("frame" stitch) and V3 (basting stitch). When using V3, you can choose from manual feed until the foot is raised from the pedal and pressed again. If STOP is cancelled the machine will start automatically after a short pause for manual feed.
  • Support for the midsize hoop, 170 x 100 mm.
  • The total number of stitches in a color block are shown with the current stitch number.
  • 27 new exciting quilt stitches.
  • Cut can be programmed.
  • 18 new big beautiful Omnimotion stitches.
  • QuickFont Plus Support
  • Stitch C33/F6 (tapered satin) now indicates stitch part.
  • FIX can now be programmed together with stitches.
  • Length, width and elongation are now shown along with the stitch number in the lower left corner of the screen. When adjusted, the number is red instead of black.