Download Designer I update fileHere you can download the latest version of the Designer I update. The update version now posted on our site includes all earlier updates.
This service is available to all Husqvarna Viking Designer I owners with a PC and Windows 95/98/NT, 2000, ME and XP, who are connected to the Internet. You can always ask your authorized Husqvarna Viking Dealer to update your Husqvarna Viking Designer I.
Designer I Update 2.24
The Designer I update, version 2.24, is common for Designer I USB and Designer I. Two separate update files are available on the Husqvarna Viking homepage, one for a USB memory and one for a floppy disk.
The new Designer I program 2.24 contains the following correction:
- Sensor Q-foot setting now available on all operation
An issue with Sensor Q-foot operation has been corrected since previous version 2.22
Plus the improvements from version 2.22 and 2.21:
- Open Toe Free Motion Spring Foot can now be used
Set the machine for Sensor Qfoot. Deselect Stitch Width Safety to allow wide stitches when using the new
Open Toe Free Motion Spring Foo(optional accessory 413 03 76-45).
- Sensor Q-foot setting now available on all stitches
Previously only V-menu stitches could be used with the Sensor Q-foot. Now all menues can be used.
- Plus the great feature of version 2.1
The new Deisgner I update, version 2.1 for both Designer I and Designer I USB owners includes 8 special quilting and embellishment stitches (E57-E64). Many of these great stitches were suggested by Designer owners. Plus the herringbone stitch (N37) requested by quilters for joining batting pieces when the batting edges are butted together.
How to download file for Designer I:
Click on the link “Download Designer I update version 2.24 and download the new file. Use a file compression utility (WinZip or similar) to unzip the downloaded file. Place the unzipped files on a 3,5” floppy. Be sure all three files (.p10) have been extracted to your disk.
|Download Designer I update version 2.24 »»|
How to download file for Designer I USB:
Click on the link “Download Designer I USB update version 2.24 and download the new file. Use a file compression utility (WinZip or similar) to unzip the downloaded file. Place the unzipped file on a USB-stick. The USB-stick should contain a file called “VFD15.BIN” after a successful download.
|Download Designer I USB update version 2.24 »»|