HUSQVARNA VIKING® DESIGNER TOPAZ™ Update

This update is available to all HUSQVARNA VIKING® DESIGNER TOPAZ™ sewing and embroidery machine owners.

HUSQVARNA VIKING® DESIGNER TOPAZ™30 software version 3056-808 and DESIGNER TOPAZ™20 software version 320-808 (August 21, 2012):

Improvement in new update


- Support for new Small Square Hoop, 80x80.


How to download and update for PC and Mac:
  • Insert a USB memory stick in your computer USB port.
  • Click on the link below for your model (Topaz 30 or Topaz 20) and download the file.
  • Use a file compression utility (WinZip or similar) to unzip the downloaded file.
  • Save the file in the root of the USB memory, not in any folder. Make sure no other update file (.lof file) is present in the root of the USB stick.
  • Insert the USB memory into your DESIGNER TOPAZ™ .
  • Press and hold the Reverse and the Needle Up/Down keys while switching on the machine. Hold the keys until you can see the reverse light flashing.
  • When the update is complete, after about 4 minutes, the machine will automatically restart.

Download update 3056-808 for DESIGNER TOPAZ™ 30 here (zip-file) >>

Download update 320-808 for DESIGNER TOPAZ™ 20 here (zip-file) >>


Previous update for the DESIGNER TOPAZ™ USB embroidery stick
(May 15, 2009)


A correction has been made to the lower case "j" of the Clarendon 12 mm font. Please follow these steps to update your DESIGNER TOPAZ™ USB embroidery stick.

  • Insert the DESIGNER TOPAZ™ USB embroidery stick in your computer USB port.
  • Click on the link below and download the file.
  • Use a file compression utility (WinZip or similar) to unzip the downloaded file.
  • Save the file in the Font folder of the embroidery stick. The new file is named "Clarendon_12.vf3" and dated 2008-08-14. It shall replace the file with the same name dated 2008-06-11.
  • You will be asked to replace the existing file. Please choose YES.
  • Your font has now been updated.