HUSQVARNA VIKING® Accessory news
Here you will find the lastest accessory information from HUSQVARNA VIKING®!
|
Small Square Hoop (with the embroidery area of 80x80 mm)Embroider small designs quickly and easily in your Small Square Hoop (sewing area 80x80 mm). It is always best to embroider in the smallest hoop for the design, so now you have the perfect hoop for those tiny embroideries! The small hoop size will fit in "tight" areas of your garments where you other hoops are too large!Part number 920334096 |
|
Changeable Decorative Guide Foot (for Interchangeable Dual Feed)The Interchangeable Dual Feed with Changeable Presser Feet is designed to feed layers of fabric and/or batting evenly. It is perfect for quilting, sewing velvet, most stretch fabrics, imitation leathers and fabrics which need accurate pattern matching. Use the Changeable Decorative Guide Foot when stitching in the ditch along a seam line sewing any decorative stitch. The metal guide in the center of the foot helps you when guiding your fabric.Part number 413340845 |
|
Multi-line Decorative FootUse the Multi-line decorative Foot to create even spacing borders with decorative stitches or as a guide when sewing Omnimotion and side-motion stitches. Guidelines are provided for accurately turning corners of ¼” (6mm) and ½” (12mm) measurements.Part number 413337145 |
|
Free Motion Echo Quilting FootThe Free Motion Echo Quilting Foot is designed to give you more control when free motion quilting. The large base ensures good surface contact with the fabric and provides better control of the stitching. The transparent base allows for 360° visibility. Vertical, horizontal and circular markings on the foot make it easy to follow a continuous line quilting pattern or design on the fabric. Sew straight lines or follow patterns with rounded edges in any direction.Part number 413320245 |
|
Join and Fold Edging FootUse the Join and Fold Edging foot to hem the fabric edge and attach lace at the same time.Part number 6200973-96 |
|
Strap and Belt Loop FootWith the Strap and Belt Loop foot, create straps and belt loops easily using a cover stitch. Just put a strip into the foot and the strip is folded automatically and stitched in place.Part number 6200971-96 |
|
Piping Foot with Cording GuideWith the Piping foot with Cording guide, you can create piping, corded tucks and decorative trims.Part number 6200970-96 |
|
Corded Wavy Edge FootSewing a decorative wavy edge is easy with the Corded Wavy Edge foot. The curvy, softly ruffled edge is a perfect finish for bridal veils, figure skating costumes, ballet skirts, crafts and more.Part number 6200972-96 |
|
Flat Trim FootWith the Flat Trim foot, you can easily add lace and trims to the top of the fabric with a coverstitch to create beautiful decorative edges and effects.Part number 6200969-96 |
|
Clear Coverstitch FootWith the Clear Coverstitch foot, you can see your fabric and marked line under the foot as you sew.Part number 6200968-96 |
|
Mega Endless Hoop (with the sewing area 260x150mm)Embroider endless designs quickly and easily with the MEGA ENDLESS HOOP.Special endless hoop design collections feature alignment stitches for matching endless designs. Part number 920 307-096 |
|
Join and Fold Edging FootUse the Join and Fold Edging Foot together with different types of edging, such as lace, embroidered trims or various fabrics, along with the beautiful HUSQVARNA VIKING® stitches to create beautiful edgings. Make lingerie in a snap, add lace to create beautiful handkerchiefs or delicate table toppers. This foot will easily guide the edging and the base fabric through the openings in the front of the foot, fold the base fabric and simultaneously sew the edging in placeThe Join and Fold Edging Foot can be used on machine group 1, 2, 3, 4, 5, 6 and 7 Join and Fold Edging Foot |
|
Embroidery Cutwork Needle KitCreate beautiful cutwork and reverse appliqué designs quickly and easily, without any tedious trimming! When prompted by your embroidery machine, just insert the color-coded Inspira Cutwork Needles and the cutting will be done automatically. The kit contains 4 individual color-coded needles, as well as a multi-purpose tool for inserting the needles into your embroidery machine. Printed instructions plus a CD with an instructional video are also included, along with five free cutwork designs to get you startedEmbroidery Cutwork Needle Kit |
|
200x200 Quilter's HoopThe 200mm x 200mm Quilter’s Hoop provides a large square area, perfect for stitching embroidery designs within quilt blocks. A template is included, marked with both inches and centimeters for ease in placing your designs. The template’s center, horizontal and vertical markings, plus the grid, ensure perfect results. Included with the hoop is a CD with 3 free designs, as well as instructions for sewing projects using the designs. An additional design can be downloaded from myembroideries.com at a special price.200x200 Quilter's Hoop |
|
Changeable 1/4" Guide FootThe Interchangeable Dual Feed with Changeable Presser Feet is designed to feed layers of fabric and/or batting evenly. It is perfect for quilting, sewing velvet, some stretch fabrics, imitation leathers and fabrics which need accurate pattern matching.Use the Changeable ¼” Guide Foot for straight stitch and hand look quilt stitch. The guide will help you keep ¼” (6mm) distance. The Changeable 1/4" Guide Foot can be used on machine group 5, 6 and 7 except for the EMERALD™ 116/118/122 sewing machines. Changeable 1/4" Guide Foot 4132383-45 |
|
Changeable Open Toe FootThe Interchangeable Dual Feed with Changeable Presser Feet is designed to feed layers of fabric and/or batting evenly. It is perfect for quilting, sewing velvet, some stretch fabrics, imitation leathers and fabrics which need accurate pattern matching.Use the Changeable Open Toe Foot when sewing Satin stitch applique, Taper stitches and Decorative stitches. The tunnel on the underside of the foot feeds smoothly and the open front gives greater visibility and a great overview of the stitches. The Changeable Open Toe Foot can be used on machine group 5, 6 and 7 except for the EMERALD™ 116/118/122 sewing machines. Changeable Open Toe Foot |
|
Three Hole Yarn FootDecorate your project with different types of decorative cords or yarn using beautiful wide HUSQVARNA VIKING® stitches and the Three Hole Yarn Foot. This foot will easily guide the yarn through the openings in the front of the foot back through the groove under the presser foot. The decorative yarn will be stitched over creating a beautiful braid embellishment.The Three Hole Yarn Foot can be used on machine group 1, 2, 3, 4, 5, 6 and 7 Three Hole Yarn Foot |
|
Mega Piping FootThe Mega Piping Foot is perfect for inserting thick home dec piping into seams and on edges for a tailored finish. The trim is sewn between the two layers of fabric in one step. You can also create your own piping for a custom finish. This foot can be snapped on to the right or the left of the needle which makes it possible to both create and sew the piping into the seam and to beautifully topstitch along the piping.Mega Piping Foot |
|
Ribbon Feet SetWith HUSQVARNA VIKING® Ribbon Feet Set you can easily create decorative ribbon embellishment. Three different feet will accomodate a variety of ribbons (from 6-13.5 mm).Ribbon Feet Set |
|
Beading FootThe Beading Foot smoothly guides beads and pearls through a channel on the foot for easy application on garments or crafts.Beading Foot |
|
Blind hem & Lace FootThe Blindhem Foot is perfect for sewing invisible hems and for applying lace. The hem is sewn, overcast and trimmed in one step.Blindhem & Lace Foot |
|
Elastic FootThe Elastic Foot guides and stretches narrow elastic (¼-½”, 6-12mm) as you sew it to fabric. It is great for sewing active wear, lingerie and other elastic insertion techniques.Elastic Foot |
|
Piping FootThe Piping Foot is perfect for inserting packaged piping into seams and on edges for a tailored finish. The trim is sewn between the two layers of fabric in one step. A groove under the foot helps guide the piping. You can also create your own piping for a custom finish.The Piping Foot makes it fast and easy to cover cording with fabric and to insert piping into seams for a professional look! Piping Foot |
|
Taping FootThe Taping Foot is used to apply seam tapes to seams to prevent stretching. It is especially good for stabilizing shoulder seams. With this foot you can reinforce and construct seams in one step.Taping Foot |
|
Texture Hoop 150x150 mmYour Texture Hoop is the perfect tool when you want to make unique embellishments on your quilts, sewing projects and garments. Use the hoop together with yarn and ribbons with different textures combined with embroidery designs or stitches to change the look of your projects.Two designs come with the hoop (a third may be downloaded at www.myembroideries.com to a special price). There are also specially designed stitches on the CD that can be combined into a unique design. As an extra bonus, four extra designs are found on the CD put together by stitches. You can also use the hoop together with any design fitting the 150x150 mm size hoop. The Texture hoop fits the DESIGNER® machines and Platinum 855E only. Texture Hoop |
|
Interchangeable Dual FeedThe Dual Feed Foot with changeable presser feet is designed to feed layers of fabric and/or batting evenly. It is perfect for quilting, sewing velvet, stretch fabrics, imitation leathers and fabrics need precise pattern matching. Snap on the Changeable Straight Stitch Foot. Select the center needle straight stitch. Adjust it up to a maximum stitch length of 6. Snap on the Changeable Zigzag Foot and select stitches up to a maximum of 7mm wide and 6mm long.The Interchangeable Dual Feed Foot can be used on machine group 5, 6 and 7 except for the EMERALD™ machines. Interchangeable Dual Feed |
|
Changeable Quilter’s Guide FootUse the Changeable Quilter’s Guide Foot when stitching in the ditch along a seam line. The foot has guidelines to make it easy to accurately turn corners for ¼” (6mm) or 1/8” (3mm) seams.The Dual Feed with Changeable Presser Feet is designed to feed layers of fabric and/or batting evenly. It is perfect for quilting, sewing velvet, some stretch fabrics, imitation leathers and fabrics which need accurate pattern matching. The Changeable Quilter’s Guide Foot can be used on machine group 5, 6 and 7 only. Changeable Quilter’s Guide Foot |
|
Flat Felled Foot 9 mm9 mm Flat-felled seams such as the typical jeans seams are extremely durable and popular. 9 mm flat-felled seams are often used in home dec items. They add a decorative touch when sewn with a contrasting thread. Best results will be achieved on medium to heavy weight fabrics.The Flat Felled Foot 9 mm can be used on machine group 1, 2, 3, 4, 5, 6 and 7. Flat Felled Foot 9 mm |
