Table Runner

Lähettänyt HUSQVARNA VIKING®
Please note that the instructions for this project are based on the DESIGNER EPIC sewing and embroidery machine but the project itself can be completed with any HUSQVARNA VIKING® sewing and embroidery machine.
 
Sewing Supplies
Cutting Instructions
  • Cut 2 strip from the coordinating print 31” x 1.75” (78.7 x 4.4cm)
  • Cut 2 rectangles from the bold print 11” x 6” (27.9 x 15.2cm)
  • Cut one large rectangle from the solid cotton 43” x 12” (109.2 x 30.5cm)
  • Cut one rectangle from the solid cotton 35” x 8” (88.9 x 20.3cm)
    Note: You may want to consider cutting this piece after embroidering the designs if you are not comfortable with you Design Positioning abilities.
Arranging Designs on Screen
  1. Download the design from the website and save to a USB stick or your mySewnet cloud account.
  2. Enter Embroidery Edit and load the design on screen.
  3. Change your hoop to the 260 x 200 DESIGNER Crown Hoop.
  4. Touch and hold the design or open the toolbox to duplicate the design until you have a total of 6 designs on screen.
  5. In the JoyOS Advisor turn on your grid in Embroidery Edit.
  6. Arrange the designs so you have 4 in a diamond shape with the squares facing in.
    Tip: Use the grid for accurate design placement.
  7. Then add 2 of the shapes at one end.

Tallennettu:
Kommentit
Blogi postissa ei ole tällä hetkellä kommentteja.