Clear 2-3 MM Embellishment Foot

Item #: 413030445

Embellish your work with small pearls.

Other information

1. Thread the machine with nylon invisible thread on top and regular sewing thread in the bobbin.
2. Snap on the Clear 2-3 mm Embellishment Foot.
3. Select one of the following stitches depending on which is available on your Husqvarna Viking machine;

Zig- zag stitch length 4.0 mm, width 3.0 mm
Heirloom appliqué stitch length 4.5 mm, width 3.0 mm.

4. Place the 2-3 mm string of pearls under the foot laying them in the groove on the underside of the Clear 2-3 mm Embellishment foot.
5. Stitch pearls to a piece of scrap fabric first to test the thread tension. If needed lower the thread tension.
6. Embellish your project with the pearls. Stitch slowly. (With some stitches it might be necessary to adjust stitch length while sewing)

not for EMERALD™ 122, 118 and 116 machines.

Works with machine:

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

image description

Make magic, easier.

Browse our complete accessory catalogue to find just the right prop.

Browse