To bind edges with 1/2 (12 mm) Bias Binding, cut a 2 (50 mm) wide bias strip of light weight fabric, or use packaged extra wide double fold Bias Binding. Straight stitch, length 2.5, or zigzag or decorative stitch at desired length.
1. Snap on Bias Binder.
2. Cut the end of the bias tape to a point. Insert the bias tape from the outside of the funnel guide, into the slot and pull it down under the foot.
3. Place the edge to be bound into the groove on the left side of the funnel guide.
4. Adjust needle position as needed or to adjust the position of the binder funnel.
5. Guide, loosen the screw on the top of the foot and position the funnel guide as needed.
Help yourself to a bit of inspiration:
Browse our complete accessory catalogue to find just the right prop.
Visit the store nearest you:
Sign up for our newsletter to see what smart sewers are reading.
Keeping the World Sewing
VIKING® is trademarks of Singer Sourcing Limited LLC. HUSQVARNA and the “crowned H-mark” are trademarks of Husqvarna AB. All trademarks are used under license by Singer
Sourcing Limited LLC. ©2016 Singer Sourcing Limited LLC. All rights reserved.
/Accessories/Bias Binder 1/2" (12 mm)