INSPIRA® Light & Soft Fuse-On Stabilizer

INSPIRA® Light & Soft Fuse-On is a fusible tricot, which provides permanent stability to delicate and hard-to-handle fabrics such as silk dupioni, taffeta, satin and stretchy knits. When applied to the wrong side of the fabric, it will give a firm foundation without affecting feel or hand.
 
Size Available:
Light & Soft Fuse-On 12”x5 yards (#620115296)

 

Best for these applications:

• Interlining of delicate fabrics, protective layer on the back garments for sensitive skin.
• Silk dupioni, taffeta, satin, rayon, fine gauge knits and fabrics with an open weave.

Other information

Directions for use:
 
For hooped embroidery:
• Cut a piece of INSPIRA® Light & Soft Fuse-On the same size as your pattern piece or fabric.
• Place the textured side of the INSPIRA® Light & Soft Fuse-On onto the wrong side of the fabric. Use a pressing cloth and a low to medium dry iron. Press, hold then lift iron (without sliding) until entire area is fused.
• Where necessary, hoop an additional stabilizer with the fabric. Select stabilizer type and weight based on design density and fabric type.
• Stitch the embroidery.
• Remove any excess additional stabilizer. INSPIRA® Light & Soft Fuse-On remains in the project.
 
For sewing and decorative stitching:
• Cut a piece of INSPIRA® Light & Soft Fuse-On the same size as your pattern piece or fabric.
• Place the textured side of the INSPIRA® Light & Soft Fuse-On onto the wrong side of the fabric. Use a pressing cloth and a low to medium dry iron. Press, hold then lift iron (without sliding) until entire area is fused.
• After stitching, INSPIRA® Light & Soft Fuse-On remains in the project.
 

image description

Make magic, easier.

Browse our complete accessory catalogue to find just the right prop.

Browse